Health & Safety

Under normal conditions of use, EnduraPanel presents no known health hazard.

Careful lifting techniques must be employed to minimise risk of injury.

Sawing and machining equipment should be fitted with dust extractors to ensure that dust levels are kept within standards laid down by Occupational Health and Safety New Zealand.

Dust masks conforming to AS/NZS 1715 and AS/NZS 1716 and eye protection conforming to AS/NZS 1337 should be worn at all times during machining and sanding operations.

Do not dispose of waste materials into any drainage system.

Most local authorities should accept EnduraPanel waste materials into recycling programmes or landfills. If in doubt, check with your local authority.