Repairing Endurapanel Frosted Panel

Equipment and supplies required:

  • All of the equipment required for the repair of an EnduraPanel gloss panel
  • Mobile bead blasting gun
  • Air compressor
  • Aluminium oxide abrasive grit or similar
  1. Repair of EnduraPanel frosted panel is much the same as for gloss panel. Remove the scratch or damage following the above process, finishing at step 6.
  2. The surface must now be returned to a frost finish using a ‘bead blast’ technique. Practice before attempting this repair as the variables of grit size, distance and angle of nozzle from surface and air pressure will all impact upon the final finish.